Interior Finishing: Galvanized Metal

Provides clean, neat edge protection at gypsum panel terminations for one- and two-coat veneer plaster finishes

Veneer trims 701A and 801A are J-shaped trims formed from galvanized steel to fit standard 1/2" and 5/8" gypsum panel depths with…

Applied after panel installation to finish veneer plaster edges at wall terminations

Veneer trims 701B and 801B are L-shaped trims designed for use at junctions of veneer gypsum base with rough concrete or masonry ceilings.

Dull-Finish Metal Corner Bead

ClarkDietrich 103 Deluxe® corner bead is used to provide an economical finish and protection at drywall corners. This traditional drywall finishing product is nailed, stapled, screwed or clinched into…

Creates elegant, rounded outside drywall corners

Bullnose corner bead is used to create a smooth, rounded look to standard drywall corners. Bullnose adds contemporary styling and a sense of openness to any room.

Premier drywall finishing bead

Clinch-On Corner Bead is recognized as the premier product for providing sturdy metal reinforcement on 90° drywall corners.

Hot-dipped steel reinforcement for long-lasting, corrosion-resistant drywall corner protection

Hot-dipped corner bead provided by Clinch-On Products, Co. offers the identical roll-formed precision as its counterpart.

Used as a finished edge for wallboard at door and window openings or when gypsum panels meet dissimilar surfaces

Metal J-Trims are strong, reveal-type galvanized steel casings that provide maximum protection and neat finished edges to…

Provides a clean finished edge for wallboard

Metal L-Trim is used to provide a clean finished edge at door and window openings or when wallboard abuts dissimilar surfaces such as suspended ceilings, beams, plaster, masonry and concrete.

Used in conjunction with joint compound when a clean, finished edge is required

U-Trim, or Spackle J is used to provide maximum protection and clean finished edges on gypsum panels around door and window openings and when wallboard abuts…

Provides superior keying for joint compound for one-coat plaster veneer systems

Mini-Bead™ 800 and 900 are fine-mesh corner beads used to provide corner reinforcement for one-coat and two-coat veneer plaster systems. 1-1/4" wide fine-…

Hot-Dipped METAL CORNER BEAD 

Quicksilver™ corner bead is used to achieve outside 90° corners at an economical price point.

Superior finish and reinforcement for off-angle drywall corners

120/135° corner bead, also referred to as splayed or off-angle bead, provides a clean, crisp finished look at off-angle intersections.

Preferred method where sink or lavatory is to be recessed

A punched metal strip attached to the front edge of the cabinet is used in some geographical areas as a screed and support for the countertop trim.

West coast Corner Bead

ClarkDietrich west coast corner bead is used to provide an economical finish and protection at drywall corners. This traditional drywall finishing product is nailed, stapled, screwed or clinched into place.